When it comes to the insulation of the exterior or internal walls of your home, you have a wide variety of choices. There are foam boards, batts, spray foam, and fibreglass.
Each one has its own pros and cons. It’s important to understand what’s available so you can make the right choice for your home.
Let’s have a look at the various types of insulation and come to a decision
Foam board
There are many choices when it comes to selecting exterior wall insulation.
You can choose from rigid-foam insulation, a membrane material, or a combination of both. Each can be used for various applications. However, you should make your selection based on your specific needs. For example, if you live in a hot climate, you may want to use insulation that is highly reflective, as it will reflect radiant heat away from your living space.
If you live in a cold climate, you may prefer to use a foam that absorbs water, which can help keep your home warm.
Rigid foam board insulation can be installed on walls, attics, foundations, and roofs. This is because it is a rigid panel that can provide continuous insulation.
It is also moisture-resistant, so you can rest assured that it will not split, crack, or deteriorate over time. In addition, it can be installed in a variety of spaces, including between studs, along a concrete wall, and in a masonry cavity.
Foam boards come in several varieties, such as EPS, XPS, and polyiso. These materials are typically manufactured in blocks or sheets and are often used for structural insulated panels.
They are also available in various thicknesses, and can be used on both the interior and exterior of your home.
When it comes to insulating your home, you can also consider blown-in insulation, which is made from small particles that are pumped into a closed cavity.
It is useful for irregular cavities and for pipes and ducts. The process is more versatile than other options, but it is usually not as energy efficient.
Another option is to install a perforated laminate on the outside of the home.
While this can be suitable for exterior uses, it cannot serve as a vapor barrier. Alternatively, you can spray foam the inside of your home.
Regardless of the method you use, you should be sure to choose insulation that is approved for exterior applications. Otherwise, you could end up with a product that does not perform as well, and you might be putting your home at risk.
Batts
If you’re building a new home or adding insulation to existing walls, you should consider the insulation options available. It will be important to determine which type is best suited to your needs, space limitations, and budget.
There are a variety of insulation materials to choose from, such as fiberglass, wool, cellulose, and rigid foam. Each of these types can be used in a variety of applications. The first step to choosing the right type of insulation is understanding how it works.
Fiberglass is a good choice for exterior wall insulation, and is very inexpensive.
However, it can sag over time, and you will likely have to replace it once it begins to deteriorate.
Nu-Wool is a renewable material that is a great choice for energy efficiency. Made from 70 percent recycled materials, this type of insulation is durable and durable.
Hemp batts are another option that can be used as an exterior wall insulation. This material is hypoallergenic and provides excellent protection against insects. They are also a great way to reduce sound transmission.
Loose-fill insulation is a very versatile product that can be blown into holes. It is not as comfortable as other options, but it can provide significant air sealing.
Insulation can be installed from inside the house or from the outside. Blown-in insulation is particularly useful if there are pipes or irregular cavities. You can also use it as a vapor barrier.
For open walls, a wet-applied cellulose may be your best bet. It has the same thermal properties as dense-packed cellulose.
The Department of Energy offers a comprehensive chart of fiberglass batts. If you’re installing batts in walls, check to make sure they are the right thickness. Also, keep in mind that your choice of insulation will depend on the heating system in your home.
For an easy way to add insulation to an existing wall, blow-in insulation is a popular option. It can be installed without too much work, but you’ll want to seal the walls well to prevent leaks.
Fibreglass
When it comes to insulation for the home, there are a number of options to choose from. While there are many manmade products, there are also several eco-friendly options available.
One of the best options for insulating the exterior of your home is rigid polystyrene foam. This form of insulation can attach to exterior walls and can even be hidden under siding.
Fiberglass is another good choice for exterior wall insulation. It is cheap and easy to install. The one downside is that it can sag after a while. To avoid this problem, you can face the insulation with paper to make fitting it to framing members easier.
For internal wall insulation, you can choose from a wide range of batts. There are fiberglass, cellulose and even sheep’s wool. Some of these options are made of natural fibres, such as cotton or hemp, while others are man made.
The most energy efficient option is a closed cell spray foam. These products create a seal that keeps air out and heat in. They can also be found in a variety of thicknesses. In the end, it is up to you to decide which type of insulation is right for you.
The best way to choose the best insulation for your needs is to do some research. There are a few different options, and the better ones will last longer. A few things to keep in mind include what your budget is and the amount of work you’re willing to put into the project.
As you consider your options, you should also consider the benefits that insulation will have on your home. Among these are reduced heating and cooling bills, increased comfort, and lower fire risks.
All of these benefits are important for any homeowner.
With these things in mind, you should be able to determine which insulation is right for your home. You can find these products from local building supply stores and insulation manufacturers.
Be sure to wear appropriate protective clothing while handling the materials. By doing so, you can be confident in your selection.
Spray foam
If you are looking to insulate your home, it is important to find the right product. This will help you reduce your energy bills and make your home more comfortable.
The type of insulation that you choose will depend on a number of factors. It’s a good idea to speak with a professional contractor to help you determine the best option for your needs.
A good place to start when determining the best product for your home is to learn more about the different types of exterior wall insulation available. Each one has its own benefits and drawbacks.
These include cost, the type of insulation it provides, and the way it is installed.
One of the most common types of wall insulation is blanket insulation. This is a one-time installation.
Typically, it is constructed with fiberglass. However, there are other options, including cellulose and mineral wool.
Blanket insulation is relatively inexpensive. Depending on the type of insulation, it will provide adequate thermal resistance for most areas of your home. However, it is not as effective at creating an air seal as other products.
Cellulose is also a good choice for insulating walls. There are several types, from foam board to Nu-Wool. In addition to being more durable, Nu-Wool has a higher R-value than fiberglass batts.
Spray foam is another option.
There are two types: closed cell and open cell. Open cell is the cheaper option, but does not offer the same air sealing properties as closed cell. Closed cell is more expensive, but it provides the highest R-value per inch.
Once you have chosen the type of insulation that will be best for your home, you can begin the installation process. Make sure you have proper protective clothing and a mask when working with fiberglass. Keep in mind that the insulation will need to be replaced in the near future.
I hope that you found this article helpful, but we are NOT insulation contractor so please DON’T contact us and ask for insulation! Thank you